欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2016, Vol. 16 ›› Issue (5): 788-793.DOI: 10.12034/j.issn.1009-606X.216201

• 过程与工艺 • 上一篇    下一篇

调质高炉熔渣制备矿渣纤维的实验研究

李智慧1,张玉柱2,龙跃2,杜培培2,张良进2   

  1. 1. 东北大学材料与冶金学院
    2. 华北理工大学现代冶金技术教育部重点实验室
  • 收稿日期:2016-05-13 修回日期:2016-06-21 出版日期:2016-10-20 发布日期:2016-10-14
  • 通讯作者: 张玉柱 zyz@ncst.edu.cn

Experiment Study on Preparation of Slag Fiber by Using Quenched and Tempered Blast Furnace Slag

LI Zhi-hui 1,ZHANG Yu-zhu 2,LONG Yue 2,DU Pei-pei 2,ZHANG Liang-jin 2   

  1. 1. School of Material and Metallurgy, Northeastern University
    2. Modern Metallurgical Technique Key Lab, Ministry of Education, North China Univ. Sci. Technol.
  • Received:2016-05-13 Revised:2016-06-21 Online:2016-10-20 Published:2016-10-14
  • Contact: ZHANG Yu-zhu zyz@ncst.edu.cn

PDF

被引次数

2

摘要： 采用四辊离心机，以铁尾矿为调质剂调质高炉熔渣生产矿渣纤维，分析了熔渣成分对成纤效果的影响，考察了不同酸度系数和辊速情况下纤维的物性变化趋势及机理. 结果表明，采用离心甩丝法制备矿渣纤维，在辊速不变、熔渣酸度系数1.1~1.3、温度1350~1450℃条件下适宜成纤，所制矿渣纤维理化指标符合国家标准.

关键词: 高炉熔渣, 离心法, 矿渣纤维

Abstract: The blast furnace slag quenched by iron tailings as modifier was used to prepare slag fiber with the equipment of four-roll centrifuge. The effect of composition on fiber-forming was analyzed, while the trend and mechanism of fiber properties was examined at different acidity coefficient (Mk) and roller speed. The result shows that this method is proper to make slag fiber with the constant roll speed, maintaining the Mk between 1.1~1.3 and the temperature of 1350~1450℃, the physical and chemical indicators of slag fiber meet the national standards.

Key words: blast furnace slag, centrifugation method, slag fiber