欢迎访问过程工程学报, 今天是

过程工程学报 ›› 2019, Vol. 19 ›› Issue (6): 1057-1065.DOI: 10.12034/j.issn.1009-606X.219106

• 综述 • 上一篇    下一篇

细颗粒物凝并技术机理的研究进展

吴 湾1,2, 王 雪1*, 朱廷钰1   

  1. 1. 中国科学院过程工程研究所,湿法冶金清洁生产技术国家工程实验室,北京市过程污染控制工程技术研究中心,北京 100190 2. 中国科学院大学化工学院,北京 100049
  • 收稿日期:2019-01-02 修回日期:2019-04-10 出版日期:2019-12-22 发布日期:2019-12-22
  • 通讯作者: 王雪 xwang1982@home.ipe.ac.cn
  • 基金资助:
    复杂气氛下PM1.0交变电凝并机理研究

Mechanism research status of agglomeration technology for fine particles removal

Wan WU1,2, Xue WANG1*, Tingyu ZHU1   

  1. 1. Beijing Engineering Research Center of Process Pollution Control, Division of Environment Technology and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China 2. School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
  • Received:2019-01-02 Revised:2019-04-10 Online:2019-12-22 Published:2019-12-22
  • Contact: WANG Xue xwang1982@home.ipe.ac.cn

摘要: 凝并技术是提高烟气中细颗粒物(PM2.5)去除效率的关键技术之一。凝并机理的研究有利于加深对细颗粒物凝并过程的理解,最大限度地提高PM2.5的凝聚速度,使PM2.5在较短的时间内团聚成大颗粒。本工作对电凝并、化学凝并和声凝并3种凝并效果显著的凝并技术机理进行概述,分别介绍了电凝并机理的核心电凝并系数方程,不同化学添加剂对颗粒的作用机制,同向运动、流体力学和声致湍流作用下的声凝并机理的发展现状。阐述了现有研究的不足,并提出在后续凝并机理的研究中,可利用高速显微摄像技术实时观测颗粒的凝并过程,对已有凝并机理进行验证及修正。同时还需考虑实际烟气成分对颗粒凝并的影响,进一步完善颗粒的凝并机理。

关键词: 细颗粒物, 凝并机理, 研究进展

Abstract: Fine particles (PM2.5), easily absorbing many harmful chemical compositions and causing adverse health problems, are difficult to be removed by conventional electrostatic precipitators (ESPs) due to the extremely low charge. Particle agglomeration, a most simple and effective way to increase mean particle size through physical and chemical methods, is drawing interest in increasing the collection efficiency of PM2.5 in ESPs. Moreover, the study of the agglomeration mechanism is very significant in revealing the influence rules of various agglomeration conditions on agglomeration efficiency. According to the different mechanisms, particle agglomeration can be divided into electric agglomeration, chemical agglomeration, acoustic agglomeration, magnetic agglomeration, turbulence agglomeration, light agglomeration, thermal agglomeration, and vapor heterogeneous condensation, etc. However, comparing with all kinds of agglomeration technologies, researchers are more interested in electric agglomeration, chemical agglomeration and acoustic agglomeration because they have more prominent agglomeration efficiency and a wider range of applications to the removal of PM2.5. In this work, the relevant study progress and present status at home and aboard were summarized and analyzed about the mechanism of electric agglomeration, chemical agglomeration and acoustic agglomeration, which included agglomeration coefficient of the key to electric agglomeration mechanism to charged particles, the condensation mechanism between various chemical adsorbents and fine particles, and the orthokinetic, hydrodynamic and acoustic streaming mechanisms of acoustic agglomeration. It was pointed out that the mechanism of particle agglomeration, which had been established by experimental observation or theoretical derivation, still required a more in-depth study. In the meantime, some suggestions, as one of the future direction of agglomeration technology, were proposed as follow: on one hand, in order to verify the particle agglomeration mechanism, the real movement of particles during the agglomeration process can be measured through high-speed microscopic imaging technology; on the other hand, the influence of complex atmosphere on the agglomeration mechanism of particles should be further explored.

Key words: Fine particles, Agglomeration mechanism, Research status