[1]郭达清.废钢资源开发利用是需要从长计议的大事[N]. 中国冶金报, 2018-05-04(001).
[2]郭艳.抓住机遇提升转型推进废钢铁产业高质绿色发展记第十一届中国金属循环应用国际研讨会暨中国废钢铁应用协会六届三次会员大会举行[J].资源再生, 2018, (04):64-67
[3]Vikas SINGH, Jyoti KUMAR.Optimisation of the Bottom Tuyeres Configuration for the BOF Vessel Using Physical and Mathematical Modelling[J].ISIJ International, 2007, 47(11):1605-1612
[4]Shiv Kumar CHOUDHARY and Satish Kumar AJMANI.Evaluation of Bottom Stirring System in BOF Steelmaking Vessel Using Cold Model Study and Thermodynamic Analysis[J].ISIJ International, 2006, 46(8):1171-1176
[5]杨文远, 张先贵, 杨勇, 刘路长, 高卫涛.转炉炼钢利用废钢的研究综述[J].中国冶金, 2012, 22(02):1-6
[6]杨文远, 张先贵, 王明林, 高卫涛, 崔怀周, 白宇.转炉熔池中废钢的运动[J].钢铁, 2013, 48(03):24-29
[7]曾兴富, 钟良才, 朱英雄.复吹转炉底枪布置优化探讨[J].炼钢, 2008, (04):52-55
[8]Zhong Liangcai Chen Junrying, LeiZhelong, et al.Physical modeling and opti mization of bottom tuyere configuration and blowing parameters in a top and bottom combined blowing converter[J].Developments in Chem ical Engineering andM ineral Processing, 2006, 14(34):343-352
[9]S K A jmani and A Chatterjee.Coldmodel study of mixing and mass transfer in LD converters at Tata Steel[J].Ironmaking & Steel making, 1996, 23(4):335-345
[10]Tatjana S, Klaus K.Bottom blowing investigations on a cold model reactor to optimize mixing behavior in metallurgical process[J].Steel Research, 2002, 73(9):373-373
[11]FiegeL, Schiel V, Schrode H, et al.Influence of bottom purging on the metallurgical results achieved in the LD steelmaking plants of Krupp Stahl AG[J].Stahl and Eisen, 1983, 103(4):159-159
[12]温良英,陈登福,董凌燕,等.复吹转炉不同冶炼时期熔池行为的水模拟研究[J].钢铁研究学报, 2006, 18(6):14-14
[13]Lou Wentao, Zhu Miaoyong.Numerical Simulations of Inclusion Behavior in Gas-Stirred Ladles[J].Metallurgical and Materials Transactions B, 2013, 44(3):762-782
[14]Lou Wentao, Zhu Miaoyong.Numerical Simulation of Desulfurization Behavior in Gas-Stirred Systems Based on Computation Fluid Dynamics–Simultaneous Reaction Model (CFD–SRM) Coupled Model[J].Metallurgical and Materials Transactions B, 2014, 45(5):1706-1722
[15]Chu, Kuan-Yu Chen, Hsing-Hao Lai, Po-Han Wu, Hsuan-Chung Liu, Yung-Chang Lin, Chi-Cheng Lu, Muh-Jung.The Effects of Bottom Blowing Gas Flow Rate Distribution During the Steelmaking Converter Process on Mixing Efficiency[J].Metallurgical and Materials Transactions B, 2016, 47(2):948-962
[16]Hans-Jürgen Odenthal, Udo Falkenreck.Jochen Schlüter.CFD simulation of multiphase melt flows in steelmaking converters[C].European Conference on Computational Fluid Dynamics
[17]LCao, Y.Wang, Q. Liu, X. Feng, . Physical and Mathematical Modeling of Multiphase Flows in a Converter[J].ISIJ International, 2018, 58:573-584
[18]刘越生,高金平,张建波,邢栋,韩哗,邓国昌.氧气复吹操作制度下废钢熔化特点的水模型实验研究[J].钢铁研究学报, 1990, 2(4):1-7
[19]刘越生, 高金平, 韩晔, 邓国昌.水模型实验中用冰块模拟废钢熔化过程的理论解析计算[J].钢铁研究学报, 1992, 4(1):15-21
[20]Kruskopf, Ari.A Model for Scrap Melting in Steel Converter[J].Metallurgical and Materials Transactions B, 2015, 46(3):1195-1206
[21]Shukla AK, Deo B, Robertson DGC.Scrap Dissolution in Molten Iron Containing Carbon for the Case of Coupled Heat and Mass Transfer Control[J].Metallurgical and Materials Transactions B, 2013, 44(6):1407-1427
[22]Li Jianghua,Provatas Nikolas.Kinetics of Scrap Melting in Liquid Steel: Multipiece Scrap Melting[J].Metallurgical and Materials Transactions B, 2008, 39(2):268-279
[23]Kruskopf, Ari.A Model for Scrap Melting in Steel Converter[J].Metallurgical and Materials Transactions B, 2015, 46(3):1195-1206
[24]沈颐身,李保卫,吴懋林 .冶金传输原理[M]. 北京:冶金工业出版社,2000, 133-147..
|